Railcar Unloading Products
Gate Opener Accessories
Hoses, Tanks, Accessories
Air Hose Assemblies
Railcar Gate Openers and Pocket Vibrators are designed to create an efficient and safe work environment. WORKMASTER's 1” heavy duty Air Hose Assemblies come in a range of lengths to keep your Gate Opener and Vibrators operating safely and efficiently at any distance. Each assembly is made from 200 PSI, nick-resistant, red rubber hose complete with universal fittings at each end. Don’t allow worn or collapsed, cut or damaged, ready-to-burst air hose turn your unloading station into an accident waiting to happen. Replace worn and/or damaged hose lengths with WORKMASTER's heavy duty Air Hose Assemblies.
| BEST FOR | DIAMETER | LENGTH | PART# |
| Gate Openers | 1" | 10 ft | 83-09078-09 |
| 15 ft | 83-09118-09 | ||
| 25 ft | 83-09134-09 | ||
| 50 ft | 83-09174-09 | ||
| Dual Roller Vibrators | 3/4" | 10 ft | 83-09077-09 |
| 15 ft | 83-09117-09 | ||
| 25 ft | 83-09133-09 | ||
| 50 ft | 83-09173-09 | ||
| The Pocket Rocket | 3/8" | 10 ft | 83-09075-09 |
| 15 ft | 83-09115-09 | ||
| 25 ft | 83-09131-09 | ||
| 50 ft | 83-09171-09 |
Air Receiver Tanks
To insure you're getting the most out of your Pneumatic Gate Opener and Railcar Pocket Vibrators your plant’s air system may need some help. WORKMASTER’s Air Receiver Tanks can deliver the additional compressed air volume your unloading site requires. All Tanks are built in accordance with the ASME Section VIII Division I Code latest edition. Each Tank is supplied with an automatic drain valve, pressure gauge and safety relief valve, making WORKMASTER’s Air Receiver Tanks the perfect addition to any unloading site’s air system.
HORIZONTAL AIR TANKS
| SIZE (Gal) | PART# | DIMENSIONS L x W x H |
| 30 | 31-32030 | 38" x 16" x 18" |
| 60 | 31-32060 | 48" x 20" x 22" |
| 80 | 31-32080 | 63" x 20 x 22" |
| 120 | 31-32120 | 68" x 24" x 26" |
| 240 | 31-32240 | 84" x 30" x 33" |
VERTICAL AIR TANKS
| SIZE (Gal) | PART# | DIMENSIONS L x W x H |
| 30 | 31-32030 | 38" x 16" x 18" |
| 60 | 31-32060 | 48" x 20" x 22" |
| 80 | 31-32080 | 63" x 20 x 22" |
| 120 | 31-32120 | 68" x 24" x 26" |
| 240 | 31-32240 | 84" x 30" x 33" |
Ball Valves
Ball Valves are an integral part of an unloading site's Air System, unfortunately they're often overlooked. When strategically placed, WORKMASTER's Brass Lockable Ball Valves can give you greater, more convenient control over your Gate Opener and Vibrator's air supply. In addition to giving you instant shut-off capability, the correct Ball Valve can give your Vibrator the instant rush of air flow needed to begin vibration. When in the closed position, each valve vents downstream air in accordance with new OSHA Regulations for pneumatic systems.
| SIZE | PART# |
| 3/8" | 81-10002 |
| 1/2" | 81-10003 |
| 3/4" | 81-10004 |
| 1" | 81-10005 |
Filter / Dryer Assembly
Stop water and dirt from entering your Gate Opener with WORKMASTER’s Filter/Dryer Assembly. This unique accessory incorporates patented inverse flow technology and is engineered specifically to remove condensed liquids and dirt from the airlines feeding your Gate Opener or Pocket Vibrator. This Filter/Dryer Assembly prevents airline moisture problems from damaging your pneumatic equipment.
- 1" NPT Inlet, flows up to 150 SCFM
- Metal Bowl
- Stainless Steel Element and Cotton Cartridge
| PART# | 82-10420 |
FRL Assembly
If your Gate Opener is not designed to include an In-Line Lubricator, WORKMASTER's FRL Assembly is ideal. The Assembly provides the utmost in tool protection by filtering, regulating and lubricating your Gate Opener's air supply. Weighing only 23 Lbs, the FRL Assembly can be easily transported, and its continuous use can extend the life of your Gate Opener and conserve your plant’s air supply.
- Universal Fittings
- 2" Diameter Gauge; 0-160 PSI
- 40 micron Filter
- 16 oz. Metal Reservoir Bowl
| PART# | 82-10330 |
