Printer Friendly

Railcar Unloading Products

Hopper Car Gate Openers

GO-E2

GO-E2 Gate Opener
GO-E2 Gate Opener View 1
GO-E2 Gate Opener View 2
Name*
E-mail*
Comments

The GO-E2 is an electric-powered Gate Opener with rolling carriage (to mount to secured-to-ground W-beam), utilizing pendant controlled, instant Forward-Reverse action, and a telescoping drive shaft with both vertical and horizontal adjustment (to follow traveling gate); accommodate varied height capstants). The GO-E2 is well suited for worksites that experience: (1) railcars that vary from easy to moderately-difficult to open range because they are well maintained and regularly repaired; (2) railcars with either fixed position or traveling gate mechanisms; (3) limited compressed air supply; (4) railcars with varied height capstan/gate mechanisms; (5) rough or uneven trackside terrain making opener maneuverability an issue. The GO-E2 uses a 5-HP motor to generate a constant speed of 34-RPM and a power output of 2,000 ft-lbs during surge and 875 ft-lbs during operation.

GO-E2 Gate Opener Features

  • 1-WORKER POSITIONING AND OPERATION -- To enable greater productivity and reduced man-power planning.

  • EASY-LIFT, MANUAL HEIGHT ADJUSTMENT -- To easily compensate for differing height gates, or variations in unloading site docks or platforms.

  • OPERATES AT 66 dBA -- To accommodate noise restrictions at plant and unloading site operations.

  • ECONOMICAL TO PURCHASE -- To meet even the tightest budget when an electric powered gate opener is required.

  • INVERTER DUTY 5-HP MOTOR -- To provide low noise, low maintenance, and high durability. Manufactured to AGMA Class 3 Standards allows 275% momentary overload capacity.

  • HEAVY DUTY, CUSTOM TELESCOPING DRIVE SHAFT -- To meet the high torque, long life, and ease of maintenance requirements of a Hopper Car Gate Opener.

GO-E2 Electric Gate Opener Specifications

Model:
GO-E2 Beam Mounted Gate Opener with telescoping driveshaft
Power:
230 / 460VAC / 3PH / 60Hz
Working Torque:
2,000 ft-lbs
Mount Assembly:
Beam Mount: Fixed Position or Rolling Carriage
Dimensions:
Motor: 24"W x 26"L x 13"H; TDS: 40" compressed to 82" extended
Height Adjustment:
TDS Lift-On to accommodate any capstan height
Finish Coating:
Acrylic Enamel over Polyurethane
Included Accessories:
(1) Capstan Drive Fitting and (1) Manual
Gate Opener Weight:
Motor: 150 Lbs; TDS: 68 Lbs; Control Pkg: 21 Lbs
Shipping Weight:
290 Lbs