Printer Friendly

Railcar Unloading Products

Hopper Car Gate Openers

GO-M3

GO-M3 Gate Opener
Name*
E-mail*
Comments

The GO-M3 is a manual-powered, hand-portable, compact Gate Opener that rests on the ground while engaged in a railcar capstan. The GO-M3, a heavy-duty torque multiplier, uses planetary gear action to enable an operator to simply turn a ratchet wrench to open gates. The GO-M3 is well suited for worksites that experience: (1) railcars that vary from easy to moderately-difficult range because they are well maintained and regularly repaired; (2) compressed air or other power is not available or limited; (3) majority of railcars have fixed position gate mechanisms; (4) trackside surface is level, smooth, and unobstructed (for cars with traveling gate mechanisms); (5) narrow decks or platforms that preclude wheeled-cart or beam-mounted Opener; (6) site security requires portable, easy removal and storage of tools and equipment. The GO-M3 generates an operator paced power output of 3,200 ft-lbs with only 173 ft-lbs of input power.

GO-M3 Gate Opener Features

  • LIGHTWEIGHT PORTABILITY -- To enable one worker to easily carry and position this 22-lb powerhouse and thereby improve safety, increase productivity, and reduce manpower planning.

  • SMOOTH, CONTINUOUS FORCE -- To facilitate steady, controlled gate opening without concern for wear of gate mechanism.

  • ECONOMICAL TO PURCHASE -- To meet even the tightest budget when a lightweight, portable Gate Opener is required.

  • VIRTUALLY NOISELESS OPERATION -- To accommodate noise restrictions at plant or unloading site operations.

  • ANODIZED COAT FINISH -- To reduce rust and corrosion in harsh environments.

  • NON-IMPACTING -- To eliminate vibration which makes the Opener comfortable and safe to use.

  • STURDY CARRYING BAG -- To allow convenient storage, and easy transport to / from the unloading site.

GO-M3 Manual Gate Opener Specifications

Model:
GO-M3 Portable Gate Opener
Power:
Manual Input Torque
Working Torque:
3200 ft-lbs Output at 173 ft-lbs Input
Torque Ratio:
18.5:1 ft-lbs
Dimensions:
14" L (with Drive Fitting) x 19.6" H (with Reaction Bar)
Height Adjustment:
Lift-On Portability to accommodate any capstan height
Output Drive:
1" Male Square Drive
Input Drive:
1/2" Female Square Drive
Finish Coating:
Acrylic Enamel Coat Finish
Included Accessories:
(1) Capstan Drive Fitting w/Pin & Ring Retainer; (1) Ratchet Wrench (1/2" Sq Dr); (1) 1" Sq Dr Spare Anvil; 3/32" Allen Wrench; (1) Sturdy Carrying Bag; (1) Manual
Gate Opener Weight:
18.3 Lbs
Shipping Weight:
34.0 Lbs