Lubricants

TOOL-CLEAN Air Tool Cleaner

WORKMASTER's TOOL-CLEAN Air Tool Cleaner will safely remove rust, dirt and varnish from inside your Gate Opener's Impact Motor. A unique blend of additives helps prevent bearing seizure, keeps rust from affecting rotors, and improves the life of the rotor blades. Even equipment already clogged by dirt, disintegrating seals or rubber hose, or that has been inactive for a period of time can be restored to peak efficiency with a single flush of TOOLCLEAN. Simply poured into the Gate Opener's inlet and allowed to work for 3 - 5 minutes, varnish, rust, and other accumulated debris are flushed out the exhaust with the spent cleaner.

TOOL-LUBE Air Tool Oil

Keep your Gate Opener running longer - up to three times longer - cleaner, with less downtime and greater power using WORKMASTER's TOOL-LUBE Air Tool Oil. Special emulsifiers allow this unique oil to absorb 10% of its weight in water preventing the formation of rust, gum and sludge. With regular use of WORKMASTER's TOOL-LUBE you can expect your pneumatic Gate Opener to operate with greater performance, consistency, and reduced noise levels.

VIBRA-LUBE Vibrator Oil

The internal parts of Pneumatic Rotary and Piston type Vibrators are subject to severe stress. These parts require a special type of lubrication. WORKMASTER's VIBRA-LUBE Vibrator Oil is uniquely formulated to coat and protect a vibrator's inner lining and moving parts. With regular use VIBRA-LUBE can add years of service to the life of your vibrator as well as reduce noise levels, increase air efficiency and power. For a pneumatic vibrator there is no substitute.