Don't overlook your flow potential —get the most use out of your vibrator with a mount beam kit!

The correct vibrator mount is clean, flat, tight and secure — and often overlooked! Too often, the majority of electric vibrators never perform to their potential because of poor, ineffective mounting. With the WORKMASTER® Vibrator Mount Beam Kit, the necessary ingredients for the proper, safe mount are right at your fingertips! Incorporate a Mount Beam Kit into your bin vibration plans and see the benefits first-hand. Properly mounted electric vibrators transmit more vibration energy into the stored material, reduce vibrator maintenance, lower noise levels, and eliminate safety concerns. Most importantly, material begins to flow again.

Vibrator Mount Beam Kit Components

Mount Plate

Equipped with Pre-Drilled Bolt Holes that match your specific vibrator and deburred edges for a clean, smooth finish.

Safety Cable

6′ Long Safety Cable with Wire Rope Clips on Each End

Two (2) Heavy-Duty Weld-On Rings

Two (2) 3M Rust & Scale Removing Pads

Sure-Grip 3M Pad Holders

Four (4) Grade 8 Hex Head Cap Screws

Matched Strength Elastic Stop Nuts

Eight (8) Compression Washers

Complete Vibrator Mounting Guide

Mount Beam Kit for Electric Vibrators
Mount Beam Kit Diagram for Electric Vibrators
Downloads
Request Information

    Your Name*

    Company Name*

    Your Email*

    Subject*

    Product of Interest*

    Your Message

    *Required